■ characteristic:
· No contact switch, stable performance and long service life.
·The output mode is optional MPN type or PNP type.
· Wide voltage input, output digital signal, can directly interface with single chip or PLC.
· Short circuit protection and polarity protection to prevent accidental misconnection caused by damage. The protection level is up to IP67, which can work in harsh environment, waterproof, dustproof and oil proof.
■ application:
• Insert the magnetic steel on the rotating object and measure its rotation speed or rotation angle.
· Travel switch, limit switch, such as driving, gantry hanger, elevator, robot, etc.
· Motorcycle, ATV, electric car, bicycle mileage measurement.
· Mining industry, for the detection of mine car automatic control systems, mine vehicles and position control and other industrial controls.
■ SUNCIO-JJ-D series
Pulse output, inductive polarity (N-pole, S-pole or N/S-pole dual output), high sensitivity, output level when the magnetic field is greater than 0.25mT, ultra-long sensing distance, with 30*10 NbFeB-N42H magnetic steel detection The distance can be up to 250mm, and the installation is flexible. According to the installation site, the sensing distance can be finely adjusted. It is mainly used for electronic pile test and road test system. By detecting the magnetic field on the ground, it can be judged whether the pressure line or the appearance.
|
Project
|
Product parameters
|
Project
|
Product parameters
|
|
Operating Voltage
|
7-24VDC
|
Operating magnetic field
|
0.2-6mT
|
|
Output method
|
NPN type, PNP type, analog type (optional)
|
No-load current
|
﹤20mA
|
|
Inductive polarity
|
N-pole, S-pole, N/S dual output (optional)
|
Load current
|
﹤80mA
|
|
Output signal
|
Pulse voltage, analog (optional)
|
LED Indicator light
|
Red
|
|
Operating temperature
|
-40℃-80℃
|
Response frequency
|
0-2kHz
|
|
Inductive object
|
Magnetic steel (magnetic field)
|
Backlash
|
0.1mT
|
|
Remarks
|
1. When transporting the sensor, keep away from strong magnetic interference, and the residual magnetism will cause the sensor to change the sensing distance.
2. Geomagnetism will have a weak influence on the sensor. The installation direction is different, and the sensing distance will change by 1-2cm, which is a normal phenomenon.
|
